Short Answer
The Replay function reuses the settings you have already made when you re-integrate a model, instead of starting from scratch. You will find it in the integration assistant's "Advanced mode", in the "Replay" step.
When to Use This
- When you want to re-integrate a model without redoing all your settings from scratch.
- "Quick re-integrate" is suitable when you want to adjust settings and the geometry does not need to be reprocessed.
- "Full re-integrate" is suitable when the 3D model should be completely reprocessed, for example after a longer period of time (takes approx. 5–30 minutes).
Prerequisites
- Replay is only available in the "Advanced mode" of the integration assistant – the Express mode does not offer this function.
Step-by-Step Instructions
- Open "Re-integrate model…" from the variant's action menu.
- Choose "Quick re-integrate" (settings can be adjusted, geometry is not reprocessed) or "Full re-integrate" (the 3D model is completely reprocessed, approx. 5–30 minutes, e.g. after a longer period of time).
- Select "Advanced mode" in the integration assistant – only this mode offers Replay.
- In the "Replay" step, choose one of the two options:
- "Quick Replay": takes over all settings from the last run.
- "Replay": select an earlier variant and copy only selected areas (zones, model elements, building services, other resources, thermal bridges).
- Check the preview to see what will be taken over.
- Click "Save".
Expected Result
The preview shows you which settings will be taken over. Clicking "Save" creates a new variant with the copied settings.
Common Mistakes
- Choosing Express mode: Replay is not available there – only "Advanced mode" offers this function.